15138mp4 -

: You will likely need a hammer and a level to ensure the shelves are straight. Step-by-Step Installation

: Install Back Clips (A) and Wall End Brackets (B) into the designated holes on your wall. Secure them by gently hammering in the Drive Pins (N) .

: Connect the support pole segments ( D, E, J ). 15138mp4

: Ensure you have Back Clips (A), Wall End Brackets (B), Wire Shelves (C, K), Support Poles (D, E, J), and Pole Shelf Brackets (F, G, H).

For a visual walkthrough of similar furniture assembly techniques like using cam locks or securing back panels, you can refer to general guides from Aosom or The Home Depot. : You will likely need a hammer and

: Attach End Caps (L, M) to the ends of the wire shelves. Note: End caps are typically only for the ends of shelving that has been cut to size. Secure Shelving :

: Attach the front end of the shelves to the back side of the Support Poles using the Pole Shelf Brackets (F, G, H) . : Connect the support pole segments ( D, E, J )

The assembly guide for model (specifically for the Rubbermaid 6-8 ft Wardrobe Organizer ) involves setting up wall-mounted shelving and support poles. Pre-Assembly Checklist