: Insert the four main screws through the base into the seat shell. Tighten them in a diagonal pattern (like lug nuts on a car tire) to ensure even pressure and prevent the shock mounts from pulling.
: Flip the chair over and give it a test rock. If it feels wobbly, slightly loosen the runner screws, let the chair settle on a flat surface, and then re-tighten everything. Maintenance Tips Chair.rar
The (or Eames RAR ) is a design classic known as the Rocking Armchair Rod Base . Whether you have an original Vitra/Herman Miller or a high-quality replica, the assembly generally follows a simple four-part process. 1. Inventory Check Before starting, ensure you have the following components: 1x Seat Shell: Usually molded plastic or fiberglass. 1x Eiffel Base: The wire "rod" structure. : Insert the four main screws through the
: Place the seat shell upside down on a soft surface (like a rug or the shipping box) to prevent scratching. Locate the four circular shock mounts on the bottom. If it feels wobbly, slightly loosen the runner
: Flip the wire Eiffel base upside down. Align the pre-drilled holes in the wooden runners with the brackets at the bottom of the base. Secure them using the provided screws.
* Step 1: Inventory Check. Before assembly begins: ... * Step 2: Assemble the Base. The base forms the foundation of your chair: . Eames Rocker Rocking Chair RAR RSR Parts
: The rocking motion can cause screws to loosen over time; check them every few months.