) are usually compressed into .rar archives, you must first extract them.
: Plug the RS-232 cable into both the PC and the receiver. Run Loader : Open the extracted loader software on your PC. Select Port & File : Choose the correct COM Port (usually COM1 or COM2).
If you're looking for a specific model, let me know the or the exact ALi chip version (e.g., 3510, 3606) so I can help you find the correct firmware version . ) are usually compressed into
: Right-click the downloaded .rar file and select "Extract Here" or "Extract to [Folder Name]" .
: Set the upgrade type to "allcode + bootloader" for a full flash. Select Port & File : Choose the correct
Once the files are extracted and the hardware is connected, follow these steps to flash the firmware:
: Switch the receiver on. The loader should detect the connection and begin the progress bar. : Set the upgrade type to "allcode +
Click to select the firmware file ( .bin or .abs format) you wish to upload.
