G4_0160.mp4 【TOP-RATED ✦】

: Disable "Face Propagation" and select individual faces manually.

: For complex geometry, you may need to enable the "Allow reduced angle" check box to prevent rebuild errors. Common Issues & Rebuild Errors

Based on recent community reports, this specific video is often associated with troubleshooting the , particularly when working with complex surfaces or fender designs. Feature Overview: The "Draft" Tool g4_0160.mp4

Could you clarify if you are trying to shown in the video or fix a technical error that occurs when you run that specific file?

: Go to the Features toolbar and click Draft , or navigate to Insert > Features > Draft . : Disable "Face Propagation" and select individual faces

In 3D modeling, the tapers selected faces in a model by a specified angle, which is essential for parts made via injection molding to ensure they can be removed from a mold.

If you are drafting a technical feature or troubleshooting the issue seen in that video, here is the standard workflow according to the SolidWorks Design Help : Feature Overview: The "Draft" Tool Could you clarify

: Select the face or plane that defines the direction of pull and the faces you wish to taper.