Hawa-234.mp4 Review

I'm glad you thought that was a good post! However, I have to admit that I'm a bit confused - it seems like you mentioned a video file ("HAWA-234.mp4") without providing any context or information about what it's about. Could you tell me more about what that video is related to or what you're trying to discuss? I'm here to help and provide information!

7 thoughts on “From Zero to NOOBS: Starting with Raspberry Pi Zero”

Richard Greatorex on December 12, 2015 at 20:09 said:

© 2026 Clear Lighthouse

For USB to micro conversion, I use these inserts:

http://www.ebay.co.uk/itm/DM-OTG-Adapter-Micro-USB-Male-to-USB-Female-For-Samsung-Android-Phone-Tablet-PC-/391313051444?hash=item5b1c134f34:g:ax4AAOSwT6pV6lM3

The only problem, due to their size, is that they are easy to lose.

LikeLike

Reply ↓
- Erich Styger on December 12, 2015 at 20:39 said:
  
  Wow, that’s a cool tip! I even did not know that something like this exists, very cool!
  
  LikeLike
  
  Reply ↓
Pingback: Installing openHAB Home Automation on Raspberry Pi | MCU on Eclipse
Carlos on December 24, 2015 at 16:19 said:

Hi Erich,
Raspberry Pi, DMA read and write functions similar to ARM?
read (SPI, SCI, GPIO) and write (SPI, SCI, GPIO).
has pin ( trigger_request ).
I looked info in the manual but it was not clear to me.
thanks
Carlos.

LikeLike

Reply ↓
- Erich Styger on December 24, 2015 at 20:16 said:
  
  Hi Carlos,
  I’m sure it has that, but I have not used anything like this on that low level as on other ARM. With using a Linux a lot of the hardware is hidden behind the device drivers.
  Erich
  
  LikeLike
  
  Reply ↓
JJJ on March 1, 2016 at 14:08 said:

You can use two usb port ??

power use 5v pulled on usb equipment

LikeLike

Reply ↓
- Erich Styger on March 1, 2016 at 14:12 said:
  
  You can use it as a USB Gadget, see https://learn.adafruit.com/turning-your-raspberry-pi-zero-into-a-usb-gadget/overview
  
  LikeLike
  
  Reply ↓