Assign to port: set interfaces [PORT] unit 0 family ethernet-switching vlan members [VLAN-NAME] .
If an error occurs, rollback 0 reverts to the last committed state.
To prevent unwanted image updates during setup, use: delete chassis auto-image-upgrade . 3. Interface and Network Setup
The following commands establish basic system identity and security: set system host name [NAME] .
set interfaces ge-0/0/0 unit 0 family inet address [IP/MASK] . Configure VLANs: Define VLAN: set vlans [VLAN-NAME] vlan-id [ID] .
Juniper Ex4200 Configuration Manual -
Assign to port: set interfaces [PORT] unit 0 family ethernet-switching vlan members [VLAN-NAME] .
If an error occurs, rollback 0 reverts to the last committed state. Juniper Ex4200 Configuration Manual
To prevent unwanted image updates during setup, use: delete chassis auto-image-upgrade . 3. Interface and Network Setup Assign to port: set interfaces [PORT] unit 0
The following commands establish basic system identity and security: set system host name [NAME] . Juniper Ex4200 Configuration Manual
set interfaces ge-0/0/0 unit 0 family inet address [IP/MASK] . Configure VLANs: Define VLAN: set vlans [VLAN-NAME] vlan-id [ID] .