: Wait for the ESCs to emit a short beep (full throttle signal), then immediately lower the transmitter throttle to idle.
: Power up your transmitter (TX) and FC. Navigate to the "Receiver Test" menu on the LCD. Move your TX sticks and verify the values change correctly (e.g., pushing the stick left should show "Rudder Left"). If they move the wrong way, use your TX's "Reverse" setting. kk2.jpg
This step ensures all motors start at the same time and respond equally to your throttle: : Ensure propellers are OFF . : Wait for the ESCs to emit a
Based on the file reference "kk2.jpg," this guide covers the , a popular and budget-friendly board used for building DIY quadcopters. This controller is unique because it features a built-in LCD screen and buttons, allowing you to configure your drone without needing a computer. 1. Hardware Assembly Move your TX sticks and verify the values