: If colors look "off," use the Sony UP-DR200 Utility Software (usually installed with the driver) to adjust the C (Cyan), M (Magenta), and Y (Yellow) density settings.
: The primary source for official documentation is the Sony Professional Support portal. You can search for "UP-DR200" there to find the Operating Instructions and Service Manuals. Sony Up Dr200 Manual
Place the paper roll into the paper holder, ensuring the paper feeds from the bottom of the roll. : If colors look "off," use the Sony
Thread the paper into the slot until the printer beeps or the "Paper" light stops flashing. : Place the paper roll into the paper holder,
: Turn the printer off and then on again; it will often attempt to eject the jammed paper automatically. If not, open the front door and gently remove the paper in the direction of the feed.
: Use the cleaning sheet provided with the paper/ribbon packs every time you change the media. Common Troubleshooting